Key Features:

- Core and Cavity Separation
- Draft Angle Analysis
- Parting line creation
- Parting surface/run-off creation
- Automatic Moldlocks
- Surface edge extension tools
- 2D and 3D Edge creation tools
- Mold insert creation
- Cross Sections
- Complex Surface Trimming
- Drill Centers and Planar Edges
- Automatic Drafting Layout (ISO/ANSI/JIS)

Moldplus standard
Core and Cavity Separation (SolidSEP)
Easily separate core and cavity geometry from complex surface or Solid models. This excruciating task that once took hours can now be done automatically in a matter of minutes in comparison to hours or days. SolidSEP literally pays for itself the first time you use it!
Draft Angle Analysis
Eliminate prototypes and tedious verification with Draft Angle Analysis. Automatically verify if your part can be machined and pulled correctly without generating a toolpath! Easily identify and isolate areas with undercuts. Surfaces are also automatically trimmed for easy knock-out construction.

Parting Line creation
Create parting curves/lines for your parts at any user-defined angle.

Parting surface / Run-off Surface
Create parting surfaces with astounding rapidity. Create 1-click automatic run-off surfaces by defining the mold boundary! Define direction lines to control the parting surface direction. Create parting surfaces using the manual method by defining the edge of the mold and selecting the surface edges to extend. Create complex corner parting surfaces with superior ease.

Automatic Moldlocks
Create moldlocks on the corners of mold inserts as side or corner locks.
Surface Edge Extension tools
Easily extend the edges of surfaces\trimmed surfaces tangentially or relative to any defined angle from the surface normal.
2D and 3D Edge creation tools
Automatically create curve edges only on the outside of the part or on selected surfaces. The part edges can also be projected onto a plane (as 2D edges) for use in contour machining or other reference geometry creation. This powerful function can also be used to verify if all surfaces are coincident.
Mold Insert Creation \ Stock Electrodes
Create square, rectangular, round or free form inserts quickly and automatically. The insert geometry can be isolated, trimmed and rotated ready for machining.
Cross Sections
Create cross sectional curves across or along surface models as single or multiple sections.
Complex Surface Trimming
Trim single or multiple sets of surfaces with blinding speed. No limitations on trimming pre-trimmed surfaces! Split or delete areas of surface models using boundaries with superior ease!
Drill Centers and Planar Edges
Create planar edges and drill Centers with point and arc information automatically on surface geometry originating from a solids modeler.
Automatic Drafting Layout (ISO/ANSI/JIS)
Creates drafting ready 2D views from surface or wireframe geometry. ISO/ANSI/JIS standard drafting layouts are provided as defaults. The user can also create custom views. The created geometry can then be used for dimensioning or engraving.
5-Axis Design Kit Features - AutoSet Normals, Radius Analysis, Check Drive Selector

AVAILABLE FOR MASTERCAM 2021, 2020 and 2019

©2020 Moldplus S.A | Requirements: Mastercam 2021, 2020, 2019, 2018, 2017, X9, X8, X7, X6, X5, X4 MU3 and below. | Moldplus® is a product of Moldplus SA. | Mastercam® is a product of CNC Software. | Webmaster |